With the clean direction, the "Peripheral" term includes all what is assistant of the computer. For that you can choose is between:

Screen

Printer

Games

Another peripherales

To configure a reader of main CD-ROM in unit.
You have two readers of CD-ROM and you do not know which is the Master or the slave (Slavic), either to start again with a CD-ROM or to solve a breakdown. It is enough to open the CPU and to look at behind units. A small rider is located at it, it is enough to place it into Slavic so that the reader is in unit slave and conversely for the other. The position is indicated beside the rider.

The reader of CD-ROM idles.
You find that your reader of CD-ROM is enough to see very slow....
Then it is necessary to open the PC and to change the connection of the reader. It should be connected directly to the mother chart and not to the same wire tablecloth as the hard disk.
For that, it is necessary go in the Control panel, in Systeme then in the manager mitre of peripherals. In the CD-ROM category, you choose yours and go in Propertys, here you notch box DMA. Start again the PC.

The engraver took the letter of the CD Reader.
Press at the same time on the keys Windows and Pause. Choose manager Peripherals then CD-ROM and click on Propertys. In the two Lettres boxes of reserved reader you choose that which is appropriate to you.
For Windows 2000 and XP it is necessary to go in the Manager of discs, finely start then on the Execute order. Type Diskmgmt.msc. Select the reader who will change name then made a right click. There you choose Modify the letter of the reader and the access path.

Illegible CD-ROM.
Can't your PC read certain CD-ROMS or CD-RW?
Either your reader is unable to read certain CD marks, which can frequently arrive, or, the data registered on the support were recorded in UDF. To read them, use DirectCD...

Impossible to engrave.
It is impossible for you to engrave with the CD engraver nor with that of DVD? Check that pilot IDE of nVidia is adapted. To install an old version then, or on the contrary the last version.

The mouse and the keyboard do not answer.
With certain mother charts, if you connect the mouse on the connector of the keyboard or reciprocally, you will not be warned a made error: there will be no alarm of the PC. The connections will stupidly have all to be modified.

The peripheral is not recognized.
The peripheral should well be connected: open the PC and check that all the contacts are well put and that the reader is well fed.
Look at the small rider which is with the back of the peripheral. If it is alone, put in master. So on the other hand two peripherals are connected on same tablecloth (style CD-ROM and CD-RW), put that which is fastest on master and the other on Slave.

The numeric keypad is blocked.
So that the numeric keypad of the keyboard is activated with starting, it is necessary to go in the base of register. To start/Carry out and type regedit.
In HKEY_USERS/Default/Control Panel/Keyboard modify the InitialKeyboardIndiocators key by replacing 0 by 2. Go then in HKEY_CURRENT_USER/DEFAULT/Control Panel/Keyboard and made the same thing.

The modem is very noisy.
To prevent that the modem is noisy, it is necessary to go in the Control panel, Modem. In the General mitre, click on Property. Here you can modulate the sound volume of your modem.

The new hard disk is invisible.
You installed a hard disk in more and it is not recognized?
Check that all connections are well made. Also check that the tablecloth is well directed, it is necessary that the red color of the tablecloth is with dimensions catch of food of the disc.
Think of putting the hard disk out of secondary: see on its back face if the rider which indicates that it is that is to say as a slave (Slavic in English!) or in secondary disc. Using a grip, place the rider on the pair of pins which is appropriate.

hight of Page