With the clean direction, the "Peripheral" term includes all what is assistant of the computer. For that you can choose is between:

Screen

Printer

Games

Another peripherales

The printer prints anything.
You want to print an e-mail for example and the printer you fate either of Chinese or anything of other! Rageant....
It is always necessary to check if the pilot is well installed, little-to be even to reinstall it. IT is enough to take either the diskette, or the CD-ROM of the printer and to remake the update. If the problem perdure, it will be necessary for you to go on the site of the manufacturer to charge the last update of the pilot.

The printer is unaware of the orders in network.
If you tried to print a text and that the printer refuses, it is because the PC on which the printer is connected is not lit. In the Panel Printer, the manager of impression is grayed, then made a right click on the printer concerned and strip use the printer except connection.

The pages leave slowly.
That can come owing to the fact that an other peripheral uses same port USB as your printer. Check well that the printer only uses this port.
Then, the printer can be configured to improve returned rather than speed. To accelerate the impression, see the properties of the printer by making a right click on the icon. Choose the General mitre or Principal, there must be a scale on the print speed and of quality. With you to regulate according to your desires the cursor.
Another cause: your hard disk. Either it is saturated or you lack memory. Make the sorting of what is not important on the hard disk and remove them. Close the software which is not used for nothing. Also think of making a defragmentation of the disc.

The printer is not recognized.
You installed the printer then the pilot who agrees to him and the PC does not see anything! To remove the pilot then. Go in the Control panel and addition/delete of program. uninstall the pilot. There, you put the CD-ROM of the pilot and you reinstall the printer as well as the pilot.

To print in a rectilinear way.
You cannot print in a rectilinear way? That arrives on the ink-jet printer, the heads are not aligned. Go in the Property of the printer and choose Utilitaire, there you launch the programme of alignment of the heads.

The document does not comprise the good characters.
The printed document calls upon bills of character of the type True Type which are not taken into account. Thus they should be associated your document. In Word for example, go in small tools then Options and select the save mitre. It is necessary to notch the Incorporate boxes the police forces True Type and To incorporate only the characters used.

Problem of ink whereas the cartridge is full.
It is said to you that there is no more ink whereas the cartridge is almost full? You must then make impression high resolutions on graphs or photographs on photo paper. That very quickly clogs the heads, it thus should be cleaned regularly.

The impressions are bad qualities.
If you impressions are bad qualities, style of the horizontal bars or white zones in the place of the text.... That surely comes from the pilot who is defective. It is necessary to remove it and reinstall it, to see installing a new more recent pilot.

The text occupies all the place.
If the text occupies all the place whereas that should not be the case, it is surely still the pilot who has problems. To reinstall it starting from the CD-ROM of the manufacturer, to also check that there is not a new more recent pilot.


The printer refuses to be in network.
Check already that the printer functions normally. Afterwards, go in the Control panel and open Réseau. Click on printer and File sharing and notch the two allow boxes other users to reach my files and allow other users to use my printers and made OK. Now click on your printer and activate the division.

hight of Page