The chapter To make safe
to you provided other easy tricks !!
quite precise site on page of starting.
To always find the same site as soon as one launches Internet
Explorer : Go in Outils then Options Internet and General,
there enter the address of the site on page of starting.
erase the addresses of the sites seen by I.E 4 and 5.0.
There is much URL in the bar of address and that obstructs
you, then open the base of register: To start, Carry out
and type regedit. Seek HKEY_CURRNET_USER, Software, Microsoft,
Internet Explorer, TypedURLs. In the window of right-hand
side remove the files.
prevent the remote loadings without your knowledge.
The sites can, after a bug Internet Explorer, to introduce
a spyware or other software. To counter that, "pass"
to Internet Explorer 6 or select tools/Options Internet
and Advanced. It is necessary to strip the Activate option
the Installation on request. After it is necessary to
open the Contenu mitre, in editor you remove the sites
which you do not consider worthy of confidence.
record only the text of a Web page.
If you want only to record the text of a Web page, go
in small Fichier then on Enregistrer under, in the Type
field, unroll the list in order to be able to only select
the option Web page HTML.
print part of the contents of a Web page.
You can print only part of a Web page if you want it.
Select thanks to the mouse the part of the page which
will be printed. Make a right click on the grayed part
and select the Imprimer order, notch the Selection box
in the zone spread out and made OK.
remove the detection of update Internet Explorer.
Internet Explorer checks with each starting if there is
an update. Prevent that it does not do it, in regedit
(start/Excute-type regedit) and seek key HKEY_CURRENT_USER
\ Software \ Microsoft \ Intenet Explorer \ Main and locate
the NoUpdateCheck key in the right shutter. For Internet
Explorer 5 and 6 it should be added by creating a new
value DWORD (click right on the page right/new and value
DWORD) which will be called NoUpdateCheck. Double click
above and give him to it value 1, type OK.
prohibit certain sites.
To prohibit sites which the children could consult: go
in Control panel and Options Internet, select the Contenu
mitre, in manager of access click on Activer. In Access
control you select a category and you move the cursor
to parameterize the level. For the authorized sites, activate
authorized Sites and seize the URL of the sites which
you accept or not and click on allways or Never then click
General and To modify the password to enter there yours.
with scripts (pop-up).
A script is a language that the webmasters put in their
sites to brighten it (images, texts, effects...) but they
can also use it to manufacture pop-ups the or different
ones to swindle you. To avoid them, go in Tool-Options
Internet-Safeties and fix the highest level of safety.
Thus the sites which function with Java, Javascrit or
ActiveX will not go any more. In the same mitre you can
indicate the sites of confidence. Click on Personnaliser
the level, you can parameterize the authorization thus
or not scripts ActiveX, Java....
method counters the pop-up.
To block the popones best is to install one anti pop-up.
But if that do not interest you, you can block them via
regedit. Click on start, To carry out and type regedit.
To seek key HKEY_LOCAL_MACHINE \ software \ Microsoft
\ Windows \ CurrentVersion \ InternetSettings \ ZonesMap
\ ProcolDefault. In the window of right-hand side create
a new key DWORD that you will call it butt:. You will
give him value 4.
post the sites by frequency.
To post the sites most visited in the History part the
menu should be selected Posting, Historical Shutter of
exploration then. Unroll small post then select the order
by frequency of site. The list will be done then by descending
the orders of small the Tools.
If you install certain software, it may be that options
appear in small tools Internet Explorer. If you do not
want any more to have them, go in the base of register:
click on Démarrer, Execute and type regedit. Seek
key HKEY_LOCAL_MACHINE \ software \ Microsoft \ Internet
Explorer\ Extensions. In the shutter of right-hand side
eliminate the keys CLSID which correspond to the elements
that you want to remove.
high a older version Internet Explorer.
Once last version Internet Explorer is installed, there
is no more average to return on old. Arrive there, in
the base of register: click on start, Execute and type
regedit. To seek key HKEY_CURRENT_USER \ Software \ Microsoft
\ Internet Explorer and remove it with the Suppr key.
Start again the PC, you can then install the version which
e-mails via Internet Explorer.
If you use Internet Explorer 5 and Outlook, you can send
e-mails directly since Internet Explorer without passing
by Outlook: click on small files, new then on Message.
an e-mail to a precise person.
To send an e-mail to a friend without passing by Outlook,
as indicated in the easy way above, it is necessary for
you to place a short cut in Favourites Internet Explorer.
Go in the C:\Windows\Favoris file. Make a right click
in the file and choose new then short cut. Write mailto:
then the address e-mail of your correspond. You can from
now on quickly send an e-mail to a correspondent while
clicking on his short cut in the menu Favoris Internet
a page of a site via an e-mail.
You found a site super and you want to make it divide.
Instead of copying the URL of the site and to stick it
in an e-mail, you can directly send the page it even.
Go in files/send/Page by e-mail. A new e-mail appears
via your transport by defect. Insert the address of your
correspondent and send it. Will know that you can write
there what you wish in the body of the message .........
Otherwise if the site is a little too heavy, make just
as previously but choose Lien by e-mail instead of Page
up Web pages with Internet Explorer.
When you add a page in your Favourites, you can also create
a copy of it on your hard disk which will be available
except connection. In the Favoris menu click on add to
the favourites, notch the give back box available except
connection. While clicking on the Personnaliser button,
you will be able to choose if you also wish that the pages
related to your favorite page be also downloaded. Click
on yes then indicate the number of levels of pages to
be downloaded. Click finally on the follows button. While
clicking then on button OK, the box of synchronization
launches out. If this one does not launch out, click on
menu tools then on the Synchroniser order. Click then
on the Synchronize button limps of synchronization then
wait until the operation finishes. You can from now on
reach this page and those which are dependent for him
without going on the Net.
the report/ratio of errors.
With Each time Internet Explorer plant it sends a report/ratio
at Microsoft without you to prevent. To prevent that Microsoft
knows all about you this procedure should be decontaminated:
go in the base of register, click on start, Execute and
type regedit. Seek key HKEY_LOCAL_MACHINE \ Software \
Microsoft \ Internet To explore \ Main. If the IEWatsonDisabled
key does not exist in the right shutter, create. You will
give him like value 0.
fast ultra research.
Thanks to Google and its program Google Search, you can
make a research starting from a word selected in Internet
It is enough to incorporate and not to download (as many
sites say!) the module and to insert it in the bar of
the bonds (to activate the bar of the bonds: select menu
post, Barre tools then activate the Links bar. Do one
to slip/deposit on the bond Google Search of the Google
page towards the bar of the bonds and answer yes invites.
Consequently a new button appears. To make research on
a word or word group, it is enough to select them and
click on the button Google Search. The results of research
are posted then in the page.
the inopportune messages for a connection.
When you are not connected and that you use either your
transport or your browser, it often happens that messages
of request connection to see even error messages appear,
which lengthens the time of posting. To avoid these messages,
open the Control panel and go in Options Internet and
choose the Connexions mitre and notch the box never not
to establish connection. Under Outlook Express train,
in menu the Tool-Options in the General mitre notch the
box to send and receive the messages with starting and
in: if the computer is not connected to this moment, it
is necessary to put not to connect itself.
That is with the bad interpretation of an order by Internet
It would be necessary to try to visit the site by Netscape.
In any event, it is very useful to have another software
of navigation for your safety like avoiding the inopportune
breakdowns. I advise you to install it plug-in Java of
SUN which is much more stable than that of Microsoft.
You can have it on the site of Sun.
of Netscape incompatible with Internet Explorer.
You can put your favourites Internet Explorer in Netscape
but the reverse is not possible! To be able to do it,
it is necessary to use a software which can carry out
this operation. It is Bookmark Converter. It is enough
that it finds the bookmark.htm file of Netscape and to
validate on the Convert button towards Internet Explorer.
thoroughly a Web page.
For those which do not know how is built a Web page or
for those which wonder by curiosity how was made such
or such page of a site, in menu post Internet Will explore
and click on Source.
A new page of the Bloc-notes type appears, all information
concerning the site are indicated there. If the page were
recorded on complete page with format htm or HTML, you
can also modify it while going in Fichier, Modifier with
print the list of the bonds of a page.
You want only to print the list of the bonds which the
site proposes to you. It is only enough to go in menu
files/print and coher the print box the bonds in a table
at the end it folder.
more than two simultaneous remote loadings.
By defect, Internet Explorer is regulated not to allow
more than two simultaneous remote loadings if you surfed
on the same Web site. Go in the base of register and seek
the key: HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Internet
Settings. create a value Valeur DWORD and name MaxConnectionsPer1_0Server
of value 10. Start again the PC.
The optimization to Internet Explorer
Power IE6 is a free utility for a personal use, it is
conceived for the breakdown service, repair and optimization
Internet Explorer 6. Moreover it enables you to have access
to functions advanced of your navigator.